TAURUS 1911 Grips - DYMONDWOOD

Taurus 1911 Grips - We build these grips specifically for the Taurus 1911! If you have a Taurus and have tried to fit standard 1911 grips to the gun you've found that there are three problems with the fit. The grip screws don't fit the counterbore, the safety levers hit the top of the grip and the cut for the ambidextrous safety needs to be deeper. We've addressed all these and developed a series of grips for the Taurus. We've also adjusted the width of the grip panel to account for the wider flat side area of the Taurus grip as shown in the photo below.

DYMONDWOOD is a composite of select hardwood veneers in 1/16" thicknesses, vacuum impregnated with advanced penetrating dyes and advanced engineering-grade phenolic resins. These veneer sheets are layered and subjected to tremendous heat and pressure in a densification process that compresses the material to about 50% of the original thickness. The result is a material with rich natural or vivid colors that through advanced engineering has great strength and durability. Typically six to seven layers of veneer are shown on a finished 1911 grip.

We currently have 39 different Dymondwood color combinations in three different surface configurations available for the Taurus 1911. No other grip manufacturer comes close to this selection. We still have a few of the color/checkering combinations that are not yet shown on the website but we'll be adding them soon

We are also adding a few custom engraved models that we'll be offering, like the monogram grips we recently added.